Engine OS-enabled devices (Denon DJ Prime series, SC Live series, and Numark Mixstream Pro) are not currently supported for use with WPA3-enabled Wi-Fi networks. Attempting to connect an Engine OS device to a WPA3-enabled network may result in a failed connection.
For a secure connection, please connect your Engine OS device to WPA2-enabled Wi-Fi networks. In most cases, the WPA protocol can be changed by accessing your Wi-Fi router settings. Please connect with the manufacturer of your Wi-fi router for more details on accessing and changing your Wi-Fi security protocol.
WPA2/WPA3 Transitional or Mixed Modes
Engine OS may be able to connect to Wi-Fi networks set to a WPA2/WPA3 "mixed mode". This will allow each connected device to use the protocol it supports.
In order to use a mixed mode, the PMF (Protected Management Frames) must be set to "optional" status. Engine OS devices will not be able to connect if PMF is enabled.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article